Flow-Level

Tempatron designs and manufactures a range of products that serve the industrial electronics market. They inlcude timers, temperature and process control products and sensors for industry.

Tempatron from Eltime – Industrial Electronics

The product line includes Tachometer Relays, Liquid Level Sensors and Flow sensors. Solid State Relays and Proximity Sensors too. There are used in Industrial Control Panels in the Automation and Energy Industries.

They are based in UK, In 2010 Tempatron Industrial Controls became part of Eltime Ltd.

(History – The company was established in 1968 as part of the Unitech plc group, became part of Invensys plc in 1996 and was taken private by the current management in 1999. The company has since developed into a number of new areas including plastic welding equipment, data acquisition systems and the manufacture of temperature sensors)

Dual red/green display that shows the set point and the process reading. 33 x 74 panel mounting. Accepts inputs from thermistors, J, K or S type thermocouples, PT100 RTD’s. Analogue voltage or current inputs also can be used, this makes it a process controller.

ELK39 Autotuning PID controller – Tempatron

ELK39 Autotuning PID controller - Tempatron
Some Features

  • Autotuning PID or on/off control modes
  • Up to 4 programmable set points
  • IP65 water and dust protection

Tempatron (A division of Eltime Limited)
Tempatron, Eltime House, Hall Road, Maldon, Essex, CM9 4NF, United Kingdom

AMOT provides the oil and gas , rail, marine, power generation and many other markets with tailored design solutions for the control and monitoring of process packages, engines, compressors and pumps

Amot – Instrumentation and Control

“Pioneering manufacturer of quality components for rotating machinery since 1948, inventor of the industrial thermostatic valve”

Prodiucts include – Electronic Controls, Speed Sensors, Temperature Switches & Engine Protection.

CSX-210 Hazardous Area Control Unit

CSX-210 Hazardous Area Control Unit

It monitors engine speed, temperatures and oil pressure. Should any one of these fall outside pre-set limits, power is withdrawn from the air intake shutoff valve solenoid causing the valve to close and shutting down the engine.

Speed Switches

Speed switches are used to monitor engine rpm in automatic diesel engine overspeed protection systems.

8026 Flow Switch

AMOT Model 8026 flow switch protects against liquid loss by sensing and switching on Flow or No- Flow operation.

Amot USA
8824 Fallbrook Dr Houston, TX 77064 USA.

Flow Meters: High Quality Mass Flow Controllers And Digital, Pipe, Or Ultrasonic Mass Air Flow Meters For Natural Gas, Oxygen, Water, And Other Liquids.

Sierra Instruments – Mass flow meters and Controllers

“Mass Flow is the quantity of direct interest whenever the molecules of the gas are the control variable in your process – such as combustion, chemical reactions, ventilation, product drying and a variety of other process applications.”

Sierra Instruments - Mass flow meters and Controllers

 

Smart-Trak – Product site focusing on Sierra’s Smart-Trak Digital Mass Flow Meters and Controllers.

“SmartTrak 100 features Dial-A-Gas® technology for true digital performance in up to ten pre-programmed gases with the same unit (gas type list can be programmed on request). Another unique factor of the Model 100 is the pilot module which replaces expensive control/readout electronics and is available mounted to the face of the instrument or in a convenient hand-held version.”

Sierra Instruments
5 Harris Court, Building. L Monterey, CA 93940, USA

Universal Process Control Instrumentation Solutions. The Products include Model N920 an Embedded Controller which is a System card mountable design. These are microcomputer-based instruments which are highly configurable for analog/digital inputs and outputs.

Florite – Process Control Instruments

The Model N920 is an embedded version of the 900 Series instrument incorporating user selectable digital and analog inputs, as well as analog and relay outputs.

N920 Universal Embedded Process Controller

N920 Universal Embedded Process Controller

Process control functions are programmed manually or by using local or remote serial commands. Inputs are accepted from analog or digital signal sources, and current, voltage or relay outputs are available.

Programmable set-points include quantity, high/low/average flow rates, time in service and are used to trigger the indicators, signal output, and invoke local and remote alarm reporting.

Florite Inc.
25574 Rye Canyon Road, Suite G
Valencia, California 91355, USA.

A leading developer and manufacturer of products and systems for pressure, temperature and level measurement. These are used in Process Control and Automation Systems.

WIKA – Pressure, Temperature and Level Products

Products include Pressure sensors, pressure transmitters, pressure switches.Bypass level indicators, magnetic float switches and optoelectronic switches. Temperature switches, analogue and digital temperature transmitters, temperature controllers and digital indicators.

Model CTI5000 Infrared calibrator

Model CTI5000 Infrared calibrator

For the calibration of infrared thermometers above ambient temperature, the model CTI5000 is suitable up to 500 °C (932 °F). Due to its stability, the new portable infrared calibrator is particularly suited to the calibration of infrared hand-held thermometers.

WIKA Alexander Wiegand SE & Co.KG
Alexander-Wiegand-Str., 3063911, Klingenberg, Germany.

WIKA Instrument, LP – U.S. Headquarters
1000 Wiegand Boulevard, Lawrenceville, GA 30043, USA

Kessler-Ellis Products (KEP) designs, manufactures and services electronic flow instrumentation, marine-grade sunlight readable displays, industrial displays, PLC peripherals, industrial computers, counters/timers, rate meters and HMI software.

KEP – Flow Computers and HMI Software

Kessler-Ellis Products has been supplying products to our industrial customers for over 43 years. Founded by Corson Ellis Jr. in 1960, KEP started as a distributor of electromechanical counting devices, and quickly grew into a full line manufacturer/distributor of counting products. ”

Dual Ratemeter-Totalizer with Two Line Display

KEP - Flow Computers and HMI Software

The RTP is a presettable Ratemeter and Totalizer from two pulse inputs. It can show rate and total at the same time on the 2 X 16 backlit LCD display

Displays: A Rate, A Total, B Rate, B Total, A+B, Rate, A+B Total, A-B Rate, A-B Total, Grand Total

Features Include

  • Two pulse and three control inputs
  • Separate Scaling Factors For A & B Inputs
  • Two relay outputs with LED Indication
  • RS232/ RS485 port for serial communication and printing

Kessler-Ellis Products – KEP
10 Industrial Way East, Eatontown, Nj 07724, USA.