Analytical-Environmental (Page 2)

Electronic instruments for the measuring of the following parameters: Temperature, Relative Humidity, Pressure, Light, Acoustics, pH, Conductivity, Dissolved Oxygen and Wind speed.

Delta OHM – Process and Environmental Instruments

The HD2106.1 and HD2106.2 are portable instruments with a large LCD display They measure conductivity, liquid resistivity, total dissolved solids (TDS) and salin ity using combined 4-ring and 2-ring conductivity/temperature probes. Temperature only is measured by Pt100 or Pt1000 immersion, penetration or contact probes.

HD 2106 Conductivity Meters - Thermometers

HD 2106 Conductivity Meters – Thermometers

The HD2106.2 is a datalogger. It memorizes up to 36,000 conductivity and temperature samples that can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and USB 2.0. The storing interval, printing, and baud rate can be configured using the menu.

Delta OHM
S.r.L. Via G.Marconi, 5 – 35030 Caselle di Selvazzano, Padova (PD) ITALIA

Instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology.

HORIBA – Process Instruments and Test Systems

“The hand-held IT-540 is a non-contact, thermal-radiation-type thermometer….It is ideal for remote temperature measurement in dangerous applications such as monitoring abnormal heat generation in high-temperature voltage transformer equipment..”

IT-540 Series handy Non-Contact Infrared Thermometers

IT-540 Series handy Non-Contact Infrared Thermometers

Features Include

  • Measurement temp range: -50 to 500°C(-58 to 932°F)
  • Response time: Less than 1.5sec (95% response)
  • MAX/MIN values displayable, Data Hold, Selection of °C and °F
  • Detector/Optical lens: Thermopile /Silifcon

HORIBA, Ltd.
2, Miyanohigashi, Kisshoin, Minami-Ku, Kyoto, 601-8510, Japan

Products and Solutions for the metering technology and reliable water treatment. They manufacture products like Chemical Transfer Pumps, Disinfection and Oxidation Systems, Metering Pumps and Dosing Systems.

ProMinent Group – Fluid Management

They also have Electronic Systems for Measuring and Control, that includes Special Sensor Technology used for these Instruments.

History –

1960 – Start-up as “Chemie & Filter GmbH” by Prof. Dr. h. c. Viktor Dulger in Heidelberg. Main focus was the production of protective filters used in the pipeline systems of private homes.

1968 – Launch of the first electronic solenoid driven dosing pump “ProMinent electronic”. The name ProMinent determined the present name of the company.

Multi-Parameter Controller diaLog DACa

Multi-Parameter Controller diaLog DACa

The diaLog DACa controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps. The multi-parameter measurement and control device offers special functions for water treatment, such as the processing of variables and control parameter

ProMinent GmbH
Im Schuhmachergewann, 5-11 69123, Heidelberg, Germany.

BAPI products are designed, engineered and manufactured at their rural Wisconsin Gays Mills Facility. The futuristic products are around the HVAC needs like Temperature Sensors, Humidity Sensors, Pressure Sensors, Wireless Sensors and Air Quality Sensors.

BAPI – Building Automation Products

The Blü-Test is a handheld temperature & humidity measurement probe that interfaces via wireless Bluetooth to the user’s enabled Smart Phone or Tablet.

The wireless communication makes it easy to take readings from difficult locations. The 8″ probe has a fast measurement time of 2 minutes in slow moving air. Each probe comes with a National Institute of Standards and Technology (NIST) traceable certificate of calibration.

Bluetooth Temp & Humidity Probe

Bluetooth Temp and Humidity Probe – BAPI

Using the Blü-Test App for the Android Phone or Tablet, you can monitor multiple points from the sensor. with a time stamp and location and even emailed for future reference or reporting.

Building Automation Products, Inc.
750, North Royal Avenue, Gays Mills, WI 54631 USA.

Development and production of Sensors, Transmitters and Instruments for measurement of relative humidity and air velocity. Humidity calibration systems.

E+E Elektronik – Moisture and Air Measurement

Products include humidity sensors, CO2 sensors, moisture in oil, dew point, air velocity, flow and temperature sensors too.

Dew Point Measurements - EE35
“The EE35 Series is based on a functional, user-friendly housing concept and on the proven polymer humidity sensors of the HC Series. A specially developed autocalibration process enables measurements in a measurement range.”

Dew Point Measurements – EE35 – E+E Elektronik

A specially developed autocalibration process enables measurements in a measurement range of -60…+60 degC Td with a Td measurement accuracy of ±2 degC.

Features Include

  • Measuring range: -60…60 deg C Td – 0…60 deg C T
  • Outputs: 0-5V, 0-10V, 0-20mA, 4-20mA
  • Accuracy: +/- 2 deg C Td – +/-0.2 deg C T
  • Supply: 24V AC/DC

E+E Elektronik GmbH
Langwiesen 7, A-4209 Engerwitzdorf, Austria.

They design and develop gas sensors and gas detection equipment. These are used in building safety, automotive, air quality and HVAC applications.

Figaro Engineering – Innovative Gas Sensing Technologies

In 1968 Figaro Engineering brought semiconductor gas sensors to the industry by their Research and Development Efforts. These are required to prevent hazard and health issues at Home and the Workplace.

Products include residential gas and carbon monoxide (CO) detectors, breath alcohol analyzers, carbon dioxide (CO2) monitoring systems. They have sensor to detect General air contaminants, Solvent vapors and Methane.

Figaro Engineering - Innovative Gas Sensing Technologies

TGS823 shown on the right side is a Alcohol Solvent vapors detector with a range 50 – 10,000ppm. Power Consumption is just 660mW and has a Ceramic base resistant to severe environments. Industrial usage

The sensing element of Figaro gas sensors is a tin dioxide (SnO2) semiconductor which has low conductivity in clean air. In the presence of a detectable gas, the sensor’s conductivity increases depending on the gas concentration in the air.

The product shown in the left is the NGM2611-E13 Methane Sensor with a 500 – 10,000ppm range and 280mW consumption. It is a Precalibrated module with TGS2611 and temperature compensation circuit for residential gas detectors. You can see more Featured Sensors from Figaro.

Figaro Engineering Inc.
1-5-11 Senbanishi, Mino, Osaka 562-8505, Japan.