Amplified EE (Page 2)

Industrial and Instrumentation products and companies..

By:
On:
In: Process Control
Tagged: , ,

RST-5000 module has been developed to provide a cost-effective solution for the monitoring of local and remote tanks or processes. It can accept any 4-20 mA output from a sensor and provide a method of calculating and reporting the level or volume of a vessel. It can also be set up to display and record user-defined units such as PSI, Temp, PH, etc. Readings are reported to a secure database on the Internet via an existing network connection.

Web Enabled 4-20 mA Input Controller

Programmed via internal web page; no special programming software required. Two programmable solid-state relays (130 mA max.) for process control or alarm points

Web Enabled 4-20 mA Input Controller

Some Features

  • Compatible with any 4-20 mA device
  • Employs Power Over Ethernet (POE)
  • 24 VDC power for sensor
  • Can use standard 24 VDC supply
  • Din-rail mounting

Automation Product Group, Inc.
1025 W 1700 N Logan, Utah 84321-1713 USA

By:
On:
In: Process Control
Tagged:

Economical 3/64 DIN panel meter that has a full size 0.56″ green or red LED display, with a built-in analog output and display hold capability. 3 1 /2 Digit Display.

Temperature Meters – DP116 – Omega

Temperature Meters - DP116 - Omega
Features Include

  • Thermocouple and RTD Input
  • Full-Size 0.56″ (14.2 mm) LED Display
  • Analog Output Standard
  • 1 /8 DIN Panel Adaptor Standard

In Response to Email from JPE – US WV to delabs

“I would like to know if you offer a monitoring solution that will constantly measure ambient (air) temperature (say, 0 to 150°F), and provide a corresponding DC voltage output of either 100 mV, 1 V, 5 V, or 10 V. Do you make a unit that can be configured to do this?”

By:
On:
In: Energy Automation, Industrial Automation
Tagged:

“Shallco was formed and incorporated by John S. Shallcross in June of 1967 with an attenuator product line acquired from Shallcross Manufacturing Company…”

Shallco – Manufacturer of Switches Breakers

Shallco snap-action switches comprise assemblies of electrically insulated stators and rotors as an integral assembly with a drive mechanism that indexes the rotors in 90 degree increments.

Snap-Action Power Switches

Snap-Action Power Switches

Features

  • Positions: 2 to 4, up to 12 poles
  • Double wiping contacts, low contact resistance
  • Current ratings to 200 amperes
  • Rapid make and break action
  • AC and DC switching
  • Many circuit variations available

Shallco, Inc.
308 Components Dr Smithfield NC 27577, USA

By:
On:
In: Process Control
Tagged:

The LGR-5320 Series are high-speed, stand-alone data loggers for analog and digital signals. Each module offers 16 analog inputs, 16 industrial digital inputs (up to 30 V), one single Form C relay (0.5 A) digital output for triggering/alarming, and four counter/encoder inputs. All inputs are sampled synchronously.

LGR-5320 Series – Multifunction Data Loggers

Stand-Alone, High-Speed, Multifunction Data Loggers.

LGR-5320 Series
Some Features

  • Up to 200 kS/s correlated sampling of all data
  • 16 analog inputs up to ±30 V
  • 16-bit resolution
  • 16 industrial digital inputs up to 30 V (500 V isolation available)
  • Single Form C relay digital output configurable for triggering/alarming
  • 4 counter inputs – conventional or quadrature available
  • 4 GB SD memory card included, supports up to 32 GB
  • Included DAQLog software

From – Measurement Computing

By:
On:
In: Process Control, Temperature
Tagged: ,

Temperature sensors for temperature measurement and process automation solutions.Mr. Bollerman opened Pyrometer Instrument Company in 1928, the first products were contact and immersion thermocouple pyrometers for molten iron and steel foundries.

Pyrometer Instrument Company

Pyrofiber Industrial Automatic Emissivity Measurement System – AEMS. This Infrared Thermometer for Temperature Control in used in temperature measurement in refractories, ovens, furnaces etc. Its uses a fiber optic sensor and is a non contact infrared thermometer.

Infrared Thermometer AEMS - Pyrometer

Infrared Thermometer AEMS – Pyrometer

Some Features Specs are –

  • Accuracy After Emissivity Correction: ± 5°F (± 3°C)
  • 1ms Data Acquisition Rate
  • 3 Temperature Models Available:
  • Internal Data Notebook & PC Interface
  • Analog & Digital Outputs

PF 905 Industrial Std Temperature Range is 1100°F – 2730°F (600°C – 1500°C). Three models available covers – 250°C – 3000°C.

The Pyrofiber Industrial incorporates an electronic microprocessor control unit housed in a NEMA enclosure, LCD digital display, membrane keypad, power supply, fiber optic cable and connections with a primary optical sensor head and (Optional) secondary irradiance (background radiance) sensor head.

Pyrometer Instrument Co.
92 North Main Street, Bldg 18-D • Windsor, NJ 08561, USA.

By:
On:
In: Temperature
Tagged:

Oven Industries has pioneered in the development of custom industrial temperature controllers and sensors. One of the highlights is the precise temperature controlled component ovens for the oscillator industry.

Oven Industries – Precise Temperature Control

Products Include

  • Programmable temperature controllers for Dental Curing Ovens
  • Nebulizer heater products and Heated humidifier.
  • TE Module H-Bridge Temperature Controller
  • Motor Speed Control for Laboratory and Production Machines

Oven Industries - Precise Temperature Control

Temperature  Controller – 5CX-754

ON OFF temperature controllers include relay output of 5 amps / 240 volts and relay output of 5 amps / 120 volts. Temperature Control Range:-65°C to 550°C in five overlapping ranges. Set Point Stability:On board single turn potentiometer.

  • Set Point Adjustment:1°C
  • Control Type: Heat or Cool
  • Control Mode:Single Mode, Heating OR Cooling
  • Load Circuit:On/Off with typical 2°C switching hysteresis
Oven Industries Inc.
434 Railroad Ave, Camp Hill, PA 17011, USA.

By:
On:
In: Process Control
Tagged:

Teledyne Hastings Instruments manufactures Piezo Vacuum Sensors and Gauges THPS 760 and THPS 760 S known for their exceptional stability and accuracy. These can be used even in Corrosive environments.

Vacuum meters THPS 760 – Teledyne Hastings

The heart of this vacum controller is the HPM-760S module, a stainless steel measurement volume attached to a small and rugged piezo-resistive transducer on a silicon chip. The chip includes a sealed vacuum reference, a resistive bridge circuit and a temperature compensation network which
provides outstanding accuracy and stability.

Vacuum meters THPS 760 - Teledyne Hastings

When exposed to atmosphere, the instrument measures barometric pressure. Calibration is simple, no test equipment is necessary, only an accurate barometric reading is required to set the high end

From – Teledyne Hastings Instruments
Reliable solutions for vacuum measurement in laboratory and industrial environments.

By:
On:
In: Process Control
Tagged: ,

Monitor and Record Temperature, Relative Humidity and Dew Point over an Ethernet network and work on it with just a Web Browser. That Simple !

Some Features – Web Server, Get Alarms by Email or Text Message, Record Years of Data on Popular SD Cards.

The iTHX-SD is great for monitoring temperature + humidity in applications such as: clean rooms, computer rooms, HVAC systems, pharmaceutical and food processing and storage, hospitals, laboratories, semiconductor fabs, electronic assembly, warehousing, museums, manufacturing, greenhouses, farm animal shelters, and many more.

iTHX-SD from NEWPORT - Web Data Logger

iTHX-SD from NEWPORT – Web Data Logger

“The NEWPORT iTHX-SD serves Active Web Pages to display real time readings, display charts of temperature and humidity, or log data in standard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic. The virtual chart viewed on the web page is a JAVA Applet that records a chart over the LAN or Internet in real time…. ”

From – NEWPORT Electronics