Danfoss Group – Antomation and Control Solutions

The Danfoss Group is a global producer of components and solutions. The products and services are used in areas such as cooling food, air conditioning, heating buildings, controlling electric motors and powering mobile machinery.

Danfoss Group – Antomation and Control Solutions

Products Include solutions for HVAC, Silicon Power Modules, Solar Inverters, DC/AC Drives for Motors. Valves, Meters and Controllers for Process Control including Cooling Control Systems.

Danfoss thermostat products are electromechanical controls which provide a volt free switch contact which will operate at the set temperature, thus providing a simple ON /OFF control.

Industrial Temperature switches – Danfoss

Industrial Temperature switches - Danfoss

RT, Temperature switches

RT controls are used in general industrial and marine sectors. The RT temperature switch series consist of a variety of ordinary room temperature switches and remote sensor temperature switches including neutral zone temperature switches.

  • Temperature ranges: – 60°C to 300°C
  • Replaceable contact system
  • Fail-safe
  • Adjustable differential
  • Enclosure IP66
  • Available with min. and max. reset function (IP54)

Danfoss A/S
Nordborgvej 81 6430 Nordborg Denmark

Mitsubishi Factory Automation

Mitsubishi Electric have advanced products and services in factory automation. They have controllers, drive control devices, power distribution control equipment and industrial mechatronics too.

Mitsubishi Factory Automation

Product Lines Include –

Compact PLC – compact dimensions and low cost compact controllers.

Modular PLC – allows users to mix and select the best combination of CPUs, communication devices, specialist control modules and discreet I/O on a back-plane.

HMI Solutions – broad spectrum of operating and visualisation systems, ranging from simple text-based HMI panels to full-featured industrial PCs.

Servo Motion Control – single axis point-to-point system through to fully synchonised 96 axis systems.

Electronic Measuring Instrument ME96NSR

Electronic Measuring Instrument ME96NSR

Electronic multi-measuring instruments are installed on power receiving and distribution facilities at buildings and factories. The instruments measure electricity, including voltage, current, power and electrical energy, in order to provide information on how electricity is being received and used.

Fuji Electric – Automation and Controls

Manufacturer of contactors and motor starters, circuit protection devices, easy logic controllers(ELCs), ring compressors, pumps and systems

Fuji Electric – Automation and Controls

Products and Solutions Include – Information control systems, substations, factory automation system components, electronic devices and vending machines.

Power Generation Plants – thermal and geothermal power generation equipment. Industrial Plants; Power electronics, electrical plant systems.

Power Drive System & Solution; The power supply equipment, servo systems, inverters and motors.

FRENIC-Mini series - AC Drive - Fuji Electric

The FRENIC-Mini series provides outstanding performance for both single-phase and three-phase applications. Available in multiple configurations to support 1/8 HP up to 5 HP AC drives / variable frequency drives (VFD) / v/ Hz vector drives, FRENIC-Mini is a compact unit that combines simple operation with industry-leading performance.

Fuji Electric America

“Power Electronics Technology” combining power semiconductors, control systems, Industrial systems and electronic devices.

ABB – Power and Industrial Technologies

A world leader in power and automation technologies the have advanced solutions in Industrial Robotics. ABB known once as ASEA Brown Boveri, is a Swiss-Swedish multinational corporation headquartered in Zürich, Switzerland

ABB – Power and Industrial Technologies

Power and Energy –

Electrical components related to electric equipment and systems like transformers, switchgear, circuit breakers, cables etc. Systems and Automation Services for distribution grids, power plants, substations etc.

Industrial Automation –

Automation products like drives, motors and generators. Instrumentation and power electronics too. Process Control Systems and Industrial robots.

ABB Communication Networks – Power T&D Solutions

ABB Communication Networks

ABB offers a full range of communications solutions. These solutions fulfill the highest demands with respect to safety, reliability, and real time response.

The ABB group
Affolternstrasse, 44 Zurich, CH-8050 Zurich, Switzerland.

Ametek – Electronic Instruments – Electromechanical

A leading manufacturer of Electronic Instruments and Systems for advanced monitoring, testing, calibrating, and display. A specialized supplier of Electromechanical components like electrical interconnects, electric motors, Cable Systems and Ceramic Seals.

Ametek – Electronic Instruments – Electromechanical

The product line includes solutions in Data Acquisition, Motion Control Products, Thermal Management Systems. They also have Materials Analysis & Detection systems and Power Electronics systems like AC/DC Programmable Power Sources.

Process Control – Level, Pressure, Temperature, Calibration, Position, Automation

AMETEK Brinell Optical Scanning System
“The B.O.S.S. represents the most significant technological improvement to Brinell testing since the test was first introduced. It measures Brinell impressions faster, more accurately and more consistently than any other solution, and it improves quality control with advanced data acquisition and analysis capabilities.”

CE Certification for Innovative Brinell Optical Scanning System

AMETEK, Inc.
1100 Cassatt Road P.O. Box 1764 Berwyn, PA 19312 USA.

Eaton – Energy and Power Management

Manufactures automation and control products related to Electrical Power Systems. They include metering devices, protective relays, communications hardware and software. Standard products like circuit breakers and power panels too.

Eaton – Energy and Power Management

Electrical solutions and engineering services for distribution, generation, and quality control of Electrical systems.

Eaton’s Type 1 Surge Protective Devices

UL1449 3rd Edition Listed surge protection products

The producy on the right is the Eaton’s Type 1 Surge Protective Device. This is a Commercial grade AC power protection and can be installed before or after a main disconnect. These devices can be used as replacements for what were previously known as secondary surge arrestors or lightning arrestors.

Cutler Hammer Electricals – Eaton

Eaton offers Cutler-Hammer Brand electrical control, power distribution, and industrial automation products and services.

  • Motor Control
  • Circuit Protection
  • Programmable Logic Controllers

Eaton’s Electrical Sector
1000 Cherrington Parkway Moon Township, PA 15108, USA

Allen-Bradley – Automation PLC and Control

Products include integrated control and information platforms, intelligent motor control and industrial components.

Allen-Bradley – Automation PLC and Control

Motor control applications from low to medium voltage, and from simple to complex, the PowerFlex family of drives from 0.2 kW (0.25 Hp) to 25.4 MW (34000 Hp) offer world-class intelligent motor control solutions.

Industrial Relays and Timers are designed for heavier-duty applications, large loads, long life and safety circuits.

Programmable Automation Controllers – Provide multidiscipline automation (i.e., process, discrete, motion, drive and batch) within a single hardware and software platform

Programmable Logic Controllers – I/O control, logic, timing, communication, report generation, data file manipulation, arithmetic, counting

SmartGuard 600 Controllers

SmartGuard 600 Controllers

These are for applications that require complex logic and more advanced safety functionality. Use SmartGuard 600 controller as a safety master on DeviceNet or  EtherNet/IP. Guard I/O modules are used to expand the number of safety devices for the SmartGuard 600 to control.

Product data from Allen-Bradley of Rockwell Automation