Palmer Wahl Instrumentation Group

Industrial supply and process measurement. Manufactures infrared, thermal imaging, temperature, humidity and calibration instruments.

Palmer Wahl Instrumentation Group

C150 High Accuracy Portable Calibrator

“Designed to simplify maintenance operations and commissioning of sensors and transmitters using process signals such as 4-20 mA or 0-10V.”

C150 High Accuracy Portable Calibrator

  • Simultaneous Measurement and Source or Dual Measurement Channels
  • Rugged IP54 Construction for On-Site Use
  • Automatic Calibration on HART Protocol Transmitter
  • Measure and Generate Voltage, Current, Frequency, Resistance Signals, Resistive
Palmer Wahl Instrumentation Group
234, Old Weaverville Road, Asheville, NC 28804, USA.

Bruel and Kjaer Sound & Vibration Measurement

They design and manufacture equipment and instruments applied in the measurement-analysis of sound and vibration. These include Software and Systems used to study vibration.

Bruel and Kjaer – Sound & Vibration Measurement

History –  In 1943 Bruel and Kjaer  launched Type 4301 – the world’s first charge accelerometer – and entered the world of vibration measurement.

Sound Level Meter - Type 2240

Sound Level Meter – Type 2240

In just two seconds, the sound level meter is powered-up and ready to measure.

A low-cost, Class 1 sound level meter conforming to international standards. The three-button user-interface and large digital display make it easy to use for on-the-spot measurements.

Features Include

Class 1 measurement precision conforming to the latest standards.  Dynamic range: 30 – 140 dB in two 80 dB ranges.

  • LAeq, LAFmax, LCpeak, LAF
  • Handy and lightweight
  • Large and clear display
  • 6 hour battery life from two AA cells

Older post in delabs

For over fifty years, LDS has specialized in high quality vibration test systems and has become a worldwide leading supplier. Test and Measurement. Dactron, Nicolet Technologies and Gould Instruments acquired by LDS.

LDS Test and Measurement 

  • 1958 – Patent for Electromagnetic Shaker
  • 1971 – Digital Transient Recorder
  • 1978 – Digital FFT Analyser

Model X88 – Calibrator from Ronan Engineering

This is a a laboratory grade type standard calibrator. It has a very good stability, to eliminate ground loop problems.the input half and output half are independent and electrically isolated.

Model X88 – Calibrator from Ronan Engineering

Model X88 - Calibrator from Ronan Engineering

Some Features

  • Direct °F or °C reading for RTD or T/C signals
  • Direct reading and sourcing of frequency signals
  •  Expanded ranges and memory capability
  • Five programmable output levels

Ronan Engineering, Engineers and Manufactures quality products with excellent mechanical design and state of the art electronic circuitry to monitor and display industrial plant conditions in diverse industries.

Ronan Engineering Company
28209 Avenue Stanford Valencia, CA 91355 USA

Veeco – Metrology and Process Equipment

Metrology & Instrumentation, Process Equipment and Epitaxial Equipment. Advanced Research tools for life science, materials science and nanotechnology.

Veeco – Metrology and Process Equipment

Solutions for Process Equipment technologies primarily to manufacturers of high brightness light emitting diodes (LEDs) and solar cells. Supplies materials to hard disk drive (HDD) manufacturers for the production of thin film magnetic heads.

Molecular Beam Epitaxy (MBE) products which include systems and components. MBE has broad applications from power amplifiers to scientific research.

GENxplor MBE System Veeco

GENxplor R&D MBE System

Veeco proudly introduces the GENxplor, the industry’s first fully-integrated MBE system for the compound semiconductor R&D market.

Its efficient single frame design combines all vacuum hardware with on-board electronics to make it up to 40% smaller than other MBE systems, saving valuable lab space. Because the manual system is integrated on a single frame, installation time is reduced.

Veeco Instruments
1 Terminal Drive, Plainview, NY 11803, USA.

Ectron data acquisition instrumentation

Ectron manufactures instrumentation products for data acquisition and calibration. They are designed for environments from laboratory to deep space, airborne to industrial. They also have data acquisition related instruments and components, more specialized and advanced in technology, this is due to the reliability and robustness needed for applications higher than industrial grade.

Ectron data acquisition instrumentation

Products include -Transducer Conditioner Amplifiers,Instrumentation Amplifiers, Frequency-To-Voltage Converters, Lvdt/Rvdt Conditioners and Thermocouple Simulator-Calibrator.

Transducer Conditioner Amplifier - 314Bs Ectron

Transducer Conditioner Amplifier – 314Bs 

Despite its small size, the Model 314B offers low drift and noise, an isolated excitation supply, and an internal dc/dc converter power supply. Filtering on all input, output and power leads provides excellent EMI/RFI protection.

“Established in 1964, the company developed and produced a line of miniature, rugged conditioner amplifiers in which the founder, Earl Cunningham, had prior experience and knew of a general need. …”

Ectron Corporation
8159 Engineer Road, San Diego, CA 92111-1907 USA

Time Electronics – Precision Calibration Equipment

Designs and manufactures calibration and metrology instrumentation. Products include decade boxes, portable and benchtop calibrators, DMMs, and custom-made test benches.

Time Electronics – Precision Test Instruments

The 7080 CalBench consists of the workstation frame, table top, and primary console. The 7082 mains power module is fitted as standard in every bench. The remaining space in the primary console houses the modules selected by the user for their applications.

Calibration modules cover electronic signal, temperature, loop, and pressure applications. Power supplies, DMMs, oscilloscopes and generator modules can also be fitted into the bench consoles.

Each CalBench is built for the end user’s designated applications. With standard modules capable of calibrating multiple instruments and devices, and add-ons or modifications to cover user-specific requirements.

Time Electronics CalBench

Time Electronics Ltd.
Unit 11 Sovereign Way, Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. England.

Altek Industries – Multifunction Calibrators

Founded in 1979, Altek a manufacturer of handheld calibrators for several variables encountered in the process control industries.

Altek Industries – Multifunction Calibrators

They have Multifunction Calibrators along with exclusive calibrators for RTD, Thermocouple too. They also provide Process Calibrators and Calibrators for Milli-amps and Frequency.

Compact Multifunction Calibrator - Altek
The TechChek 830 sources and reads like a milliamp or voltage calibrator, simulates and measures T/Cs & RTDs like a temperature calibrator, generates and counts frequency and Counts-Per-Minute like a frequency calibrator and displays pressure like a precision test gauge.

Compact Multifunction Calibrator – Altek

Calibration Kit Get One to Go. All the tools you need with a special package price. TechChek 830 Process Calibrator n Model 618P Pressure Pump…..

Features Include –

  • Source and Read Milliamps, Volts, Millivolts.
  • Six RTD Types, Seven Thermocouple Types,
  • Resistance and Frequency.
  • QuikCal pressure modules display in 20 engineering units.
  • Built-In Transmitter Power Supply

Altek Industries, Inc.
PO Box 837 Everett, WA 98206, USA.