Pyrometer Instrument Company

Temperature sensors for temperature measurement and process automation solutions.Mr. Bollerman opened Pyrometer Instrument Company in 1928, the first products were contact and immersion thermocouple pyrometers for molten iron and steel foundries.

Pyrometer Instrument Company

Pyrofiber Industrial Automatic Emissivity Measurement System – AEMS. This Infrared Thermometer for Temperature Control in used in temperature measurement in refractories, ovens, furnaces etc. Its uses a fiber optic sensor and is a non contact infrared thermometer.

Infrared Thermometer AEMS - Pyrometer

Infrared Thermometer AEMS – Pyrometer

Some Features Specs are –

  • Accuracy After Emissivity Correction: ± 5°F (± 3°C)
  • 1ms Data Acquisition Rate
  • 3 Temperature Models Available:
  • Internal Data Notebook & PC Interface
  • Analog & Digital Outputs

PF 905 Industrial Std Temperature Range is 1100°F – 2730°F (600°C – 1500°C). Three models available covers – 250°C – 3000°C.

The Pyrofiber Industrial incorporates an electronic microprocessor control unit housed in a NEMA enclosure, LCD digital display, membrane keypad, power supply, fiber optic cable and connections with a primary optical sensor head and (Optional) secondary irradiance (background radiance) sensor head.

Pyrometer Instrument Co.
92 North Main Street, Bldg 18-D • Windsor, NJ 08561, USA.

Oven Industries – Precise Temperature Control

Oven Industries has pioneered in the development of custom industrial temperature controllers and sensors. One of the highlights is the precise temperature controlled component ovens for the oscillator industry.

Oven Industries – Precise Temperature Control

Products Include

  • Programmable temperature controllers for Dental Curing Ovens
  • Nebulizer heater products and Heated humidifier.
  • TE Module H-Bridge Temperature Controller
  • Motor Speed Control for Laboratory and Production Machines

Oven Industries - Precise Temperature Control

Temperature  Controller – 5CX-754

ON OFF temperature controllers include relay output of 5 amps / 240 volts and relay output of 5 amps / 120 volts. Temperature Control Range:-65°C to 550°C in five overlapping ranges. Set Point Stability:On board single turn potentiometer.

  • Set Point Adjustment:1°C
  • Control Type: Heat or Cool
  • Control Mode:Single Mode, Heating OR Cooling
  • Load Circuit:On/Off with typical 2°C switching hysteresis
Oven Industries Inc.
434 Railroad Ave, Camp Hill, PA 17011, USA.

FLIR T600-Series – Thermal Imagers

The FLIR T640 / T620 is an ergonomic and flexible Thermal Imager with a high image quality, 640 x 480 pixels size, rich in details.

FLIR T600-Series – Thermal Imagers

The user interface has the now popular touch-screen technology. The T640 allows you to resolve temperature differences as small as 0.04°C.

FLIR T-Series - Thermal Imagers

Laser Pointer

The position of the laser pointer is highlighted on the IR-image, which helps you associate the hot spot in the image with the physical target.

Sketch, Text and Voice annotations. Include a sketch with the IR image of the inspected object, just draw it on the touch screen.

FLIR T640 Features Include

  • Thermal sensitivity: <35 mk @ +30ºC
  • Temperature range: -40°C up to +2000ºC
  • 1-8x continuous, digital zoom
  • Wifi, USB, Digital Video Interface.
  • Multi Spectral Dynamic Imaging – MSX

FLIR Systems Inc – Design, Manufacture and Marketing of Thermal Imaging Infrared Cameras.

ThermoView Pi20 – Raytek Corporation

The Pi20 is a high performance fixed thermal imager for moving or stationary targets in industrial process control applications. This is a Fixed thermal imager for harsh industrial environments.

ThermoView Pi20 – Raytek Corporation

ThermoView Pi20 provides easy networking over long distances, using the standard Ethernet interface. This interface allows for the PC operating the DataTemp Pi (DTPi) intuitive and easy to use software.

ThermoView Pi20 - Raytek Corporation

They also provide a LabVIEW and C++ based Software Development Kit (SDK) for users who need to develop their own customized software solutions.

Features Include

  • Compact industrial design with on-board Ethernet
  • DataTemp Pi software supports up to 16 cameras
  • IP54 rating
  • Range Option A -40 to 500°C (-40 to 932ºF)
  • Range Option B 200 to 2000°C (392 to 3632ºF)

Founded in 1963, Raytek designs, manufactures, markets and services a complete line of infrared, noncontact temperature measurement instruments for industrial, process control and maintenance applications.

Raytek Corporation (Fluke)
1201 Shaffer Road Building 2 Santa Cruz, CA 95060 United States

Temperature Controllers Autotune CN72000

The CN72000 Series temperature/ process controllers set a new quality, versatility, ease-of-use and value standards.

Temperature Controllers Autotune Fuzzy Logic

Temperature Controllers Autotune Fuzzy Logic

Types J, K, E, T, L, N, B, C, S and R, RTD’s, differential input (-10 to 10 mVdc); and process input (0 to 20 mAdc, 0 to 10 Vdc).

The CN72000 Series can be programmed for on/off, PID, heat/cool, or latching alarm. All outputs are isolated from the inputs. Outputs include 10 A relay, and scalable 0 to 20 mAdc.

  • Dual-Display NEMA 4X (IP65)
  • Front Panel Resists Dust and Moisture
  • Front Panel Programmability
  • 16 Ramp/Soak Segments, End Control
  • Autotune and Fuzzy Logic
  • Isolated Control Outputs

(This also is a profile controller and could be used for rubber curing or similar applications, – ananth)

Temperature and Process Controllers – Omega

Fluke Ti32 Thermal Imager for Industries

The new Fluke Ti32 combines a powerful 320×240 sensor into the award winning, rugged design of the Ti25 and Ti10, delivering the first industrial grade, high performance thermal imager.

Fluke Ti32 Thermal Imager for Industries

No need to carry pen and paper-record findings by speaking into the imager. Voice annotations can be recorded with every image you take. Decide for yourself, Amazing Fluke Instrument Test. Thermal imagers from fluke. Ti32 Infrared Camera survives a 2 meter drop – without a scratch.

Fluke Ti32 Thermal Imager for Industries

One-handed focus capability, emissivity correction, reflected background temperature compensation, and transmission correction increase the accuracy of measurements in most situations

Specifications –

Temperature measurement range (not calibrated below -10 °C) -20 °C to +600 °C (-4 °F to +1112 °F)

Detector type 320 X 240 Focal Plane Array, uncooled microbolometer

Thermal sensitivity (NETD) ≤ 0.045 degrees C and 45 mK

Infrared spectral band 7.5 μm to 14 μm (long wave)

3i Series – Laser Sighting – Handheld Pyrometer – Raytek

These units are made-to-order and matched for optimum performance when measuring critical temperatures in very distant targets or high temperatures up to 3000ºC or 5400ºF.

3i Series – Laser Sighting – Handheld Pyrometer – Raytek

The Raytek 3i series of noncontact thermometers measures surface temperature in places other
thermometers cannot. With a choice of spectral responses, temperature ranges, laser sighting options
and on-board data logging capabilities, the Raytek 3i meets the individual requirements of demanding users.

3i Series - Laser Sighting - Handheld Pyrometer - Raytek

Features Include

  • Temperature Range: -30º to 1200°C
  • Spectral Response: 8 – 14 microns nominal – thermopile
  • Distance to Spot Size: 25:1 up to 180:1
  • Emissivity: 0.10 – 1.0 digitally adjustable

To assure accuracy, 3i pyrometer also compensates for the energy reflected by the background around the target, making it a great tool to use nearby objects with high temperatures; for example inside a furnace.