Each ControlMaster has an innovative HMI at the heart of its operation, providing a common link with other instrumentation products from ABB. So, if you know one, you know them all. Operation is so easy that you will be impressed by the efficiency of it all.
Compact Process Controller – CM30 – ABB
The ControlMaster CM30 is a flexible, 1/4 DIN, universal PID process controller that boasts a clear, full-color TFT display and an intuitive operator interface that simplifies configuration and operation.
Fully configurable via the easy-to-navigate front panel menus or PC configuration software, the CM30 can be commissioned rapidly and then tuned via the advanced autotune capability.
Features packed in include math, totalization and a frequency input, logic, gain scheduling, split
output, valve control and real time alarms.
Established in 1991 to be specialists in Moisture Measurement, IMA have rapidly become known as experts in Hygrometry and Watercut systems. We supply general Hygrometers, Trace Dewpoint Meters, Relative Humidity Analysers, Water in Oil Analysers and Moisture in Solids Analysers to every corner of industry.
IMA UK – Moisture and Dewpoint Measurement Analysers
IMA have a comprehensive range of analysers for just about any application.
The determination of dew point by monitoring condensation on a temperature controlled mirror allows a highly accurate (±0.1 °C) measurement.
The 473 is supplied complete with a robust IP65 case to ensure that the instrument can be transported safely to site for validation projects or shipped for calibration without risk of damage. The custom foam insert provides storage space for additional measuring heads, cables, manuals and calibration certificates.
MBW 473 – precision dew point measurement
MBW473 has the ORIS facility, reducing stabilisation time when measuring at low dew point levels. ORIS uses a pre-programed vapour injection procedure to accelerate the formation of a frost layer on the chilled mirror surface….
Parkwell House, Otley Road, Guiseley, West Yorkshire, LS20 8BH, UK
POWER-IO was formed in order to expand the use of solid state power switching ( ssr, scr, igbt, mosfet, or microprocessor supervised solid state contactor ) technology in automation applications from 0.1 amp up to hundreds of amps.
POWER-IO – Custom and Standard Power Switching
Power control, heater contactors, solid state motor starters, lighting contactors, robotics, PLC interface i/o, and network i/o. Industrially hardened for commercial, military FCS, aerospace, test equipment, transportation, HVAC & other applications.
Custom interfaces for vac control inputs, vdc control inputs, 4-20mA inputs, Modbus communications, DeviceNet multi-drop communications and more. Current limited vdc input requirements of the POWER-IO products mean that they can interface to PLC or PC based control systems.
537 Braemar Avenue, Naperville, IL 60563, USA
The Pi20 is a high performance fixed thermal imager for moving or stationary targets in industrial process control applications. This is a Fixed thermal imager for harsh industrial environments.
ThermoView Pi20 – Raytek Corporation
ThermoView Pi20 provides easy networking over long distances, using the standard Ethernet interface. This interface allows for the PC operating the DataTemp Pi (DTPi) intuitive and easy to use software.
They also provide a LabVIEW and C++ based Software Development Kit (SDK) for users who need to develop their own customized software solutions.
- Compact industrial design with on-board Ethernet
- DataTemp Pi software supports up to 16 cameras
- IP54 rating
- Range Option A -40 to 500°C (-40 to 932ºF)
- Range Option B 200 to 2000°C (392 to 3632ºF)
Founded in 1963, Raytek designs, manufactures, markets and services a complete line of infrared, noncontact temperature measurement instruments for industrial, process control and maintenance applications.
Raytek Corporation (Fluke)
1201 Shaffer Road Building 2 Santa Cruz, CA 95060 United States
The CN72000 Series temperature/ process controllers set a new quality, versatility, ease-of-use and value standards.
Temperature Controllers Autotune Fuzzy Logic
Types J, K, E, T, L, N, B, C, S and R, RTD’s, differential input (-10 to 10 mVdc); and process input (0 to 20 mAdc, 0 to 10 Vdc).
The CN72000 Series can be programmed for on/off, PID, heat/cool, or latching alarm. All outputs are isolated from the inputs. Outputs include 10 A relay, and scalable 0 to 20 mAdc.
- Dual-Display NEMA 4X (IP65)
- Front Panel Resists Dust and Moisture
- Front Panel Programmability
- 16 Ramp/Soak Segments, End Control
- Autotune and Fuzzy Logic
- Isolated Control Outputs
(This also is a profile controller and could be used for rubber curing or similar applications, – ananth)
Temperature and Process Controllers – Omega
Inductive, capacitive and ultrasonic proximity sensor models, all of which offer you no-touch object detection….
Allen-Bradley Proximity and Presence Sensors
The diverse Allen-Bradley offering serves the full spectrum of customer needs, from light-duty packaging applications to the punishing environments on automotive welding equipment or the harsh washdowns in food processing plants.
Presence Sensors detect the location of objects or personnel near hazardous areas. The Types are …
Radio Frequency Identification Devices (RFID), Inductive Proximity Sensors, Capacitive Proximity Sensors, Ultrasonic Sensors, Photoelectric Sensors and Safety Devices.
WorldProx Tubular General Purpose Sensors
Cost-Effective and Comprehensive Solutions for a Wide Range of Non-Contact Presence Sensing Applications
“Inductive Proximity Sensors detect metal objects without touching them. This technology is used in applications where the metal object to be detected is within an inch or two of the sensor face.”
Ring and Slot Sensors are specialty inductive sensors that determine the presence of metal objects passing through them.
Compact multi-channel indicator with a colour backlit touchscreen 3.5″ display. The system is based on a LINUX operating system, which is ideal for applications where simultaneous measurement and control is required.
CMC-99 Multichannel Indicator with PID
Built-in RS485 interface, Modbus RTU protocol as the standard communications. USB.
Input Types: Configurations
- 48 x analogue 0/4-20mA, 0-10V
- 48 x digital inputs
- 12 x Universal inputs V / I / RTD / TC / mV / R
- 24 x Thermocouple inputs
- 12 RTD inputs
Output Types: Configurations
- 8 x analogue 0/4-20mA
- 16 x relay (1A250V or 5A/250V) / SSR output
Impress Sensors & Systems Ltd
Regency House, 22-25 Kingsclere Park, Kingsclere, Hampshire, RG20 4SW, UK.