A leading developer and manufacturer of products and systems for pressure, temperature and level measurement. These are used in Process Control and Automation Systems.
WIKA – Pressure, Temperature and Level Products
Products include Pressure sensors, pressure transmitters, pressure switches.Bypass level indicators, magnetic float switches and optoelectronic switches. Temperature switches, analogue and digital temperature transmitters, temperature controllers and digital indicators.
Model CTI5000 Infrared calibrator
For the calibration of infrared thermometers above ambient temperature, the model CTI5000 is suitable up to 500 °C (932 °F). Due to its stability, the new portable infrared calibrator is particularly suited to the calibration of infrared hand-held thermometers.
WIKA Alexander Wiegand SE & Co.KG
Alexander-Wiegand-Str., 3063911, Klingenberg, Germany.
WIKA Instrument, LP – U.S. Headquarters
1000 Wiegand Boulevard, Lawrenceville, GA 30043, USA
Kessler-Ellis Products (KEP) designs, manufactures and services electronic flow instrumentation, marine-grade sunlight readable displays, industrial displays, PLC peripherals, industrial computers, counters/timers, rate meters and HMI software.
KEP – Flow Computers and HMI Software
Kessler-Ellis Products has been supplying products to our industrial customers for over 43 years. Founded by Corson Ellis Jr. in 1960, KEP started as a distributor of electromechanical counting devices, and quickly grew into a full line manufacturer/distributor of counting products. ”
Dual Ratemeter-Totalizer with Two Line Display
The RTP is a presettable Ratemeter and Totalizer from two pulse inputs. It can show rate and total at the same time on the 2 X 16 backlit LCD display
Displays: A Rate, A Total, B Rate, B Total, A+B, Rate, A+B Total, A-B Rate, A-B Total, Grand Total
- Two pulse and three control inputs
- Separate Scaling Factors For A & B Inputs
- Two relay outputs with LED Indication
- RS232/ RS485 port for serial communication and printing
Kessler-Ellis Products – KEP
10 Industrial Way East, Eatontown, Nj 07724, USA.
Sensidyne was founded in 1983 as a manufacturer and distributor of gas detection equipment. In 1995, the Gilian Instrument Company was acquired to expand the existing line of vapor and particulate personal sampling pumps.
Sensidyne – Air Monitoring systems
Sensidyne is a leading provider of gas detection systems designed to detect toxic and combustible gas levels in ambient air in a variety of industries.
Sensidyne Technical Library
Library of Technical of Manuals and Support Documents for Sensidyne Products
The products the design and manufacture include – Sound and Vibration Instruments, Air Sampling Pumps and Equipment and Gas Detection Sensors and Instruments.. They also have some specialized instruments like the Sensidyne CDEM-1000 a Portable, Direct-reading Coal Dust Explosibility Meter.
Sensidyne Nephelometer – Aerosol Monitor
The Sensidyne Nephelometer is an advanced real-time dust monitor (aerosol monitor) accurately measuring dust concentrations using proven light scatter technology.
This portable instrument accurately measures and records dust from 1-10,000 μg/m3 with resolution to 1 μg/m3. Sample modes are selectable between 60 second sample, 15 minute STEL, or continuous sampling.
1000 112th Circle North, Suite 100 St. Petersburg, FL 33716 U.S.A.
A leading manufacturer in the controls and instrumentation industry, Dwyer Instruments was established in 1931.Among many others they serve the HVAC and pollution control industry segments.
Dwyer Instruments – Controls and Instrumentation
They are known for the Magnehelic differential pressure gages, Photohelic pressure switch/gages and varied types of flow-meters and valves.
Series MPC Pump Controller
“Incorporated in the MPC is programmable level differential for on/off control of one or two pumps, valves, or other devices through two SPDT relays. Also featured are two additional programmable alarm contacts with front alarm light indication.”
Dwyer Instruments, Inc.
102 Indiana Hwy. 212 (P.O. Box 373) Michigan City, IN 46360 (46361) USA
US manufacturer and supplier of advanced Load Cells, Force Sensors, Torque Sensors, Pressure Sensors, Signal Conditioners, Digital Displays and Portable Sensor Verification / Calibration Systems (VCal) utilizing Strain Gauge and thin film technology. Estd. -1988,
FUTEK Advanced Sensor Technology
Selecting the right Sensor for your application is no easy task. There is no real industry standard on how you go about selecting your product. Other challenges you may encounter include finding compatible instrumentation or requiring a non-standard product that could increase delivery time.
How To Guides – Futek
Even after you pick the right sensor, it will not give you satisfactory results if it is installed incorrectly. It is also important to find a sensor manufacturer that has the experience to support your needs before and after the sale. That’s why we provided some useful tips on how to select a Load Cell, Torque Sensor, Pressure Sensor or when you’re looking to build a Sensor System Solution.
FUTEK Advanced Sensor Technology, Inc.
10 Thomas, Irvine, California 92618, USA.
Manufacturer of industrial control products in York, Pennsylvania. The Product Lines include Human Machine Interface, HMI – operator interface panels for PLCs, motor drives, SCADA etc. Process Control instruments like PID controllers, signal conditioners, and data-acquisition systems.
Red Lion Controls – HMI and Process Control
High Performance Protocol Converter/Data Logger/Web Server
Data Station Plus – Protocol Converter, Data Logger, and Web Interface
Some Features of a Data Station
- Protocol Conversion Feature Converts Numerous Protocols Simultaneously
- Virtual HMI Offers Built-in PC-based SCADA Functionality (DSPSX & DSPGT)
- Webserver Provides Worldwide Access To Data Logs And Virtual HMI (DSPSX & DSPGT)
- Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
- 10 Base-T/100 Base-TX Ethernet Connection Can Connect To An Unlimited Number Of Devices Via Four Protocols Simultaneously
A Dutch company manufacturing Liquid/Fluid Management and Process Monitors/DPM and Support Control instruments. Product range include flow computers, indicators, totalizers, transmitters and more.
Fluidwell – Liquid and Fluid Process Control
Since 1993, the display business unit has established a name in innovative and original contributions to the development of flow computers, flow rate / totalisers, batch controllers, indicators and monitoring systems.
Products Include Indicators, controllers and monitoring systems for liquid and gas flow applications as well as for level, pressure and temperature measurement
Remote monitoring of industrial processes via universal wireless solutions for process data collection.
P.O. Box 6, 5460 AA Veghel, The Netherlands.