Line of products that range from alphanumeric and ASCII terminals to fully-loaded Touchscreen industrial computers. Maple Systems has a reliable and affordable operator interface solutions for automation and computerized machines.
Maple Systems – Operator Interface Technology
“With modern touchscreens, intuitive software, and unrivaled value and functionality, Maple Systems provides versatile control solutions to complement your machine’s design:”
Maple’s HMI5043N and HMI5043T Widescreen HMIs have 4.3 inch touchscreen displays with a resolution of 480 x 272 pixels and a 16:9 aspect ratio. Both have the same features, that the HMI5043T also has an Ethernet port.
COMPACT Graphic HMI – Maple Systems
Cost effective because of their small size, these graphic HMIs are powerful enough to handle most HMI tasks and they are loaded with 90 percent of the features found in our top of the line Graphic HMIs.
This 4.3 inch Widescreen Unit gives you 35 percent more screen area than a standard 3.5 inch model. And the 4.3 inch gives you 480 x 272 pixels — 70 percent more pixels than a standard 3.5 inch screen.
Maple Systems Inc.
808 134th Street SW, Suite 120 Everett, WA, USA
Source for process measurement and control. Everything from thermocouples to chart recorders. Temperature, flow and level, data acquisition.
Established in 1962, Omega started as a manufacturer of thermocouples. Now it is a Technical Supported Marketplace for Industrial and Engineering; components and equipment. It is also a Engineering Service with custom product and system solutions for your Automation or Laboratory needs.
Omega Engineering – Industrial System Materials
Omega’s Technical Reference Section. Find technical articles and reference material about their products and technologies. Omega’s Temperature Handbook Technical Reference Section.
Omega Engineering – Technical Reference Section
Whether you are an Industrial Control Engineer, Equipment Manufacturer or doing Research in a Laboratory; these Catalogs and Books are a Valuable Reference, from one of the Oldest and Reliable Source of Technical Information and Products. – delabs
8/16-Channel Thermocouple/Voltage Input USB Data Acquisition Module
The OM-DAQ-USB-2401 is a portable USB 2.0 full speed thermocouple/voltage input data acquisition module that can be used with either desktop or laptop PCs.
OMEGA Engineering, Inc.
One Omega Drive P.O. Box 4047 Stamford, Connecticut 06907-0047, USA
A Dutch company manufacturing Liquid/Fluid Management and Process Monitors/DPM and Support Control instruments. Product range include flow computers, indicators, totalizers, transmitters and more.
Fluidwell – Liquid and Fluid Process Control
Since 1993, the display business unit has established a name in innovative and original contributions to the development of flow computers, flow rate / totalisers, batch controllers, indicators and monitoring systems.
Products Include Indicators, controllers and monitoring systems for liquid and gas flow applications as well as for level, pressure and temperature measurement
Remote monitoring of industrial processes via universal wireless solutions for process data collection.
P.O. Box 6, 5460 AA Veghel, The Netherlands.
Industrial supply and process measurement. Manufactures infrared, thermal imaging, temperature, humidity and calibration instruments.
Palmer Wahl Instrumentation Group
“Designed to simplify maintenance operations and commissioning of sensors and transmitters using process signals such as 4-20 mA or 0-10V.”
C150 High Accuracy Portable Calibrator
- Simultaneous Measurement and Source or Dual Measurement Channels
- Rugged IP54 Construction for On-Site Use
- Automatic Calibration on HART Protocol Transmitter
- Measure and Generate Voltage, Current, Frequency, Resistance Signals, Resistive
Palmer Wahl Instrumentation Group
234, Old Weaverville Road, Asheville, NC 28804, USA.
Bronkhorst High-Tech B.V., the European market leader in thermal Mass Flow Meters/Controllers and Electronic Pressure Controllers, has many years experience in designing and manufacturing precise and reliable measurement and control devices.
Gas and Liquid Flow Control – Bronkhorst
Products Include Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems. Calibration equipment and Custom Solutions.
FLOW-BUS is a Fieldbus, designed by Bronkhorst based on RS485 technology, for digital communication between digital devices, offering the possibility of host-control by PC.
Bronkhorst High-Tech B.V.
Nijverheidsstraat 1A, NL-7261, AK Ruurlo, The Netherlands.
Temperature sensors for temperature measurement and process automation solutions.Mr. Bollerman opened Pyrometer Instrument Company in 1928, the first products were contact and immersion thermocouple pyrometers for molten iron and steel foundries.
Pyrometer Instrument Company
Pyrofiber Industrial Automatic Emissivity Measurement System – AEMS. This Infrared Thermometer for Temperature Control in used in temperature measurement in refractories, ovens, furnaces etc. Its uses a fiber optic sensor and is a non contact infrared thermometer.
Infrared Thermometer AEMS – Pyrometer
Some Features Specs are –
- Accuracy After Emissivity Correction: ± 5°F (± 3°C)
- 1ms Data Acquisition Rate
- 3 Temperature Models Available:
- Internal Data Notebook & PC Interface
- Analog & Digital Outputs
PF 905 Industrial Std Temperature Range is 1100°F – 2730°F (600°C – 1500°C). Three models available covers – 250°C – 3000°C.
The Pyrofiber Industrial incorporates an electronic microprocessor control unit housed in a NEMA enclosure, LCD digital display, membrane keypad, power supply, fiber optic cable and connections with a primary optical sensor head and (Optional) secondary irradiance (background radiance) sensor head.
Pyrometer Instrument Co.
92 North Main Street, Bldg 18-D • Windsor, NJ 08561, USA.
Oven Industries has pioneered in the development of custom industrial temperature controllers and sensors. One of the highlights is the precise temperature controlled component ovens for the oscillator industry.
Oven Industries – Precise Temperature Control
- Programmable temperature controllers for Dental Curing Ovens
- Nebulizer heater products and Heated humidifier.
- TE Module H-Bridge Temperature Controller
- Motor Speed Control for Laboratory and Production Machines
Temperature Controller – 5CX-754
ON OFF temperature controllers include relay output of 5 amps / 240 volts and relay output of 5 amps / 120 volts. Temperature Control Range:-65°C to 550°C in five overlapping ranges. Set Point Stability:On board single turn potentiometer.
- Set Point Adjustment:1°C
- Control Type: Heat or Cool
- Control Mode:Single Mode, Heating OR Cooling
- Load Circuit:On/Off with typical 2°C switching hysteresis
Oven Industries Inc.
434 Railroad Ave, Camp Hill, PA 17011, USA.