Pyrometer Instrument Company

Temperature sensors for temperature measurement and process automation solutions.Mr. Bollerman opened Pyrometer Instrument Company in 1928, the first products were contact and immersion thermocouple pyrometers for molten iron and steel foundries.

Pyrometer Instrument Company

Pyrofiber Industrial Automatic Emissivity Measurement System – AEMS. This Infrared Thermometer for Temperature Control in used in temperature measurement in refractories, ovens, furnaces etc. Its uses a fiber optic sensor and is a non contact infrared thermometer.

Infrared Thermometer AEMS - Pyrometer

Infrared Thermometer AEMS – Pyrometer

Some Features Specs are –

  • Accuracy After Emissivity Correction: ± 5°F (± 3°C)
  • 1ms Data Acquisition Rate
  • 3 Temperature Models Available:
  • Internal Data Notebook & PC Interface
  • Analog & Digital Outputs

PF 905 Industrial Std Temperature Range is 1100°F – 2730°F (600°C – 1500°C). Three models available covers – 250°C – 3000°C.

The Pyrofiber Industrial incorporates an electronic microprocessor control unit housed in a NEMA enclosure, LCD digital display, membrane keypad, power supply, fiber optic cable and connections with a primary optical sensor head and (Optional) secondary irradiance (background radiance) sensor head.

Pyrometer Instrument Co.
92 North Main Street, Bldg 18-D • Windsor, NJ 08561, USA.

Oven Industries – Precise Temperature Control

Oven Industries has pioneered in the development of custom industrial temperature controllers and sensors. One of the highlights is the precise temperature controlled component ovens for the oscillator industry.

Oven Industries – Precise Temperature Control

Products Include

  • Programmable temperature controllers for Dental Curing Ovens
  • Nebulizer heater products and Heated humidifier.
  • TE Module H-Bridge Temperature Controller
  • Motor Speed Control for Laboratory and Production Machines

Oven Industries - Precise Temperature Control

Temperature  Controller – 5CX-754

ON OFF temperature controllers include relay output of 5 amps / 240 volts and relay output of 5 amps / 120 volts. Temperature Control Range:-65°C to 550°C in five overlapping ranges. Set Point Stability:On board single turn potentiometer.

  • Set Point Adjustment:1°C
  • Control Type: Heat or Cool
  • Control Mode:Single Mode, Heating OR Cooling
  • Load Circuit:On/Off with typical 2°C switching hysteresis
Oven Industries Inc.
434 Railroad Ave, Camp Hill, PA 17011, USA.

Vacuum meters THPS 760 – Teledyne Hastings

Teledyne Hastings Instruments manufactures Piezo Vacuum Sensors and Gauges THPS 760 and THPS 760 S known for their exceptional stability and accuracy. These can be used even in Corrosive environments.

Vacuum meters THPS 760 – Teledyne Hastings

The heart of this vacum controller is the HPM-760S module, a stainless steel measurement volume attached to a small and rugged piezo-resistive transducer on a silicon chip. The chip includes a sealed vacuum reference, a resistive bridge circuit and a temperature compensation network which
provides outstanding accuracy and stability.

Vacuum meters THPS 760 - Teledyne Hastings

When exposed to atmosphere, the instrument measures barometric pressure. Calibration is simple, no test equipment is necessary, only an accurate barometric reading is required to set the high end

From – Teledyne Hastings Instruments
Reliable solutions for vacuum measurement in laboratory and industrial environments.