• Ads

Minidatalogger HD207 – Delta OHM

Stable and Reliable monitoring of temperature and relative humidity. Delta Log2 software helps record and analyze the recorded data in a PC. The datalogger functions of Start, Stop, Configuration, Data Download and Logging Interval can be selectable either from instrument or computer.

Minidatalogger HD207 – Delta OHM

Logging Capacity – 240K for one channel, 120K for two channels, 80K for 3 ch.
PC Interface Through a passive optoisolated RS232 serial port, 9600 bauds
Reading Interval Selectable among 1, 5, 10, 15, 30sec, 1, 5, 10, 15, 30min, 1hour.

Minidatalogger HD207 - Delta OHM

Typical applications are: monitoring of temperature/humidity during transportation, storage of
fresh or frozen foods, fruit, vegetable products and flowers, pharmaceuticals, sensitive and photographic products, paper, explosives, as well as laboratory activities in general.

Delta OHM – Process and Environmental Instruments

Electronic instruments for the measuring of the following parameters: Temperature, Relative Humidity, Pressure, Light, Acoustics, pH, Conductivity, Dissolved Oxygen and Wind speed.

Delta Ohm S.r.L.
Via G.Marconi, 5 – 35030 Caselle di Selvazzano, Padova (PD) ITALIA

4170+ Single Loop Controller – West Instruments

The 4170+ single loop controller is part of the Plus series range and has 3-point stepping control designed specifically for open loop, valve motor drive (VMD) applications.

4170+ Single Loop Controller – West Instruments

Incorporates advanced tuning algorithms, with selectable pre-tune and self-tuning. Pre-tune is used on start-up and is a one step tuning algorithm designed to get you to setpoint fast with self-tuning being enabled near setpoint and normal operating conditions to control overshoot.

4170 Single Loop Controller - West Instruments

Universal Input for Thermocouple, RTD, DC, linear mA/V/mV, user selectable.

Four Outputs; relay, DC linear, SSR driver, Triac, Transmitter Power Supply

Features Include

  • 3-Point Stepping valve control
  • Valve position indication
  • Auto or Manual Tuning
  • Process and loop alarms
  • Remote/dual setpoint options
  • Modbus communications

From West Instruments

West Control Solutions
1675 Delany Road, Gurnee, IL 60031, USA.