Baumer – Force Strain Pressure Sensors Instruments
Baumer Sensors are used in control loops and process displays for the purpose of optimising and controlling machines and production lines.
Applications in industrial automation and drive systems. Sectors where these sensors are used – Plastics industry, Vehicle manufacture, Textile industry, Handling-robotics, and Oil exploration.
G1MMH – Absolute encoders
- Encoder multiturn / bus cover
- Optical sensing
- Resolution: singleturn 13 bit, multiturn 16 bit
- Through hollow shaft of 1″ and 2″ diameter
A standardised application for distributed industrial automated systems has been defined on the basis of CAN. CANopen was developed within the framework of the CAN-in-Automation (CiA) organisation.
Pfingstweide 28, 61169 Friedberg, Germany
Pepperl+Fuchs – Factory Automation Process Control
Pepperl+Fuchs: Industrial Factory Automation Sensors and Process Control Systems for the Chemical, Pharmaceutical, and Petrochemical Industries.
Factory Automation Division – Leading manufacturer of a wide range of industrial inductive, photoelectric and ultrasonic sensors. Complementing this line of mostly binary sensors, also offers complex sensors, identification and communication systems.
Process Automation Division – Market leader for intrinsically safe components and intrinsically safe decentralized peripherals. Products easily connect with Fieldbus Components and allow the simple design of Fieldbus Topology.
PROFIBUS Power Hub Gateway Module
The Fieldbus-Gateway HD2-GTR-4PA is a system component of the FieldConnex Power Hub for PROFIBUS PA.
Lilienthalstraße 200, 68307 Mannheim, Germany
Leading designer, manufacturer, and provider of data acquisition solutions to the test and measurement market. With expertise in the design of high-accuracy, high-quality hardware and application software.
Data Acquisition Solutions – Data Translation
“The DT9837 is a highly accurate USB data acquisition module that is ideal for portable sound and vibration measurements. Four 24-bit IEPE (ICP) sensor inputs are synchronized with a tachometer input to provide data streams that are matched in time for field or laboratory use.”
- Runs on USB Power…ideal for portable applications…no external power supply needed
- Four Simultaneous, 24-bit Delta-Sigma A/D channels for high resolution measurements with support for IEPE inputs, including use of a 4mA current source and AC or DC coupling
- Up to 105.4kHz sampling rate per channel
- Tachometer input support in the A/D data stream for synchronizing measurements
Data Translation, Inc.
100 Locke Drive, Marlboro, MA 01752-1192, USA
Onset Computer Corporation has been producing small, inexpensive, battery-powered HOBO data loggers and embedded controllers since 1981……broad range of data loggers and weather stations products that are used to measure temperature, humidity, light intensity, voltage etc.
Onset Computer – Data Logging and Monitoring
Onset’s wireless data loggers are ideal for applications where near-real-time data is needed and manual data offload is impractical. For indoor environments,
Onset’s web-based data logging systems enable real-time, remote access to your data via cellular, Wi-Fi, or Ethernet communications. They can be configured with a wide range of external sensors for measuring weather conditions outdoors, and energy, power and environmental conditions indoors.
HOBO Micro Station Data Logger
Accurately monitor outdoor weather conditions with the HOBO Micro Station. This rugged data logger starts at $231 and is popular because of its compact size. It accepts up to four plug-and-play smart sensors, and has over 500k of nonvolatile flash data storage. The Micro Station can run up to 1 year on four standard AA batteries.
Onset Computer Corporation, Inc.
470 MacArthur Blvd, Bourne, MA 02532, USA
Teledyne Gas and Liquid analyzers
“Teledyne designs and manufactures sensors, gas and liquid analyzers, and custom systems which combine over 50 years of expertise in electronics, chemistry and engineering.”
“Founded in 1946 as Research Instrument Corporation, a division of Applied Physics, the company was renamed Analytic Systems when acquired by United Electro Dynamics in 1957. In 1964, Teledyne, Inc. acquired United Electro Dynamics, and Analytic Systems group became Teledyne Analytical Instruments. “
The Series 3000T Trace Oxygen Analyzers provides powerful microprocessor technology while offering tremendous versatility in the low ppm ranges. This instrument offers three user-selectable linear ranges, high accuracy, fast response, adjustable alarms, and auto diagnostics.
The Model 3010TB Trace Oxygen Analyzer is designed as a split architecture version of the 3000 series. A bulkhead mount, NEMA 4 rated control unit designed for non-hazardous areas, controls a specially developed analysis unit that can operate in a hazardous area.
Teledyne Analytical Instruments
16830 Chestnut Street, City of Industry, California 91748-1020, USA